Description
WITH CURRIE DISC BRAKE KIT, PARKING BRAKE CABLE KIT, AND BRAKE LINE KIT FOR THE APPLICATIONS BELOW (PART #GMB5557X-K2). CURRIE CRATE REAR ENDS ARE DESIGNED TO BE A BOLT-IN UPGRADE.
FITS:
- CHEVROLET:
- 1955-1957 BEL AIR, DELRAY, 150, AND 210
- *EXCLUDES ALL STATION WAGONS, SEDAN DELIVERIES, AND NOMADS DUE TO THEIR “BOWTIE” SHAPED GAS TANK THAT REQUIRES A CENTERED HOUSING REAR END, AS OPPOSED TO A CENTERED PINION REAR END
INCLUDES:
- CURRIE 9-PLUS NOTCH-BACK REAR END WITH 31 SPLINE AXLES (CURRIE #CE-GMB5557X)
- 9-PLUS NOTCHBACK HEAVY DUTY HOUSING
- 31 SPLINE PERFORMANCE AXLE PACKAGE
- BUILT TO THE STOCK OVERALL WIDTH (60″) AND PINION OFFSET SPECS
- 60″ IS MEASURED OUTSIDE-OF-AXLE-FLANGE TO OUTSIDE-OF-AXLE-FLANGE, IN OTHER WORDS, WHERE THE WHEEL BOLTS ON TO WHERE THE WHEEL BOLTS ON
- HEAVY-DUTY 2 1/4″ WIDE LEAF SPRING PADS ARE INSTALLED IN THE STOCK LOCATION FOR AN EASY BOLT-IN INSTALLATION
- HOUSING INCLUDES ALL 3RD MEMBER STUDS INSTALLED
- THESE ARE 9″ FORD CENTER SECTIONS, SO THEY DO REQUIRE A 9″ FORD 3RD MEMBER (SOMETIMES REFERRED TO AS A CHUNK); IF YOU DONT CURRENTLY HAVE ONE, WE DO OFFER THEM IN SEVERAL RATIOS
- AXLES INCLUDE:
- STOCK 5 X 4 3/4″ WHEEL BOLT PATTERN
- WHEEL STUDS INSTALLED
- 1/4″ THICK HEAVY-DUTY BEARING RETAINER PLATES
- TAPERED TIMKEN STYLE WHEEL BEARINGS PRESSED ON
- THE AXLE FLANGES ON THIS REAR END ARE THE BIG BEARING FORD (NEW STYLE), ALSO KNOWN AS “TORINO”, WHICH FIT THE CURRIE BRAKES PERFECTLY
- CURRIE 11″ DISC BRAKE KIT (CURRIE PART #CE-6012E6):
- CURRIE BRAKE KITS CONSIST OF SPECIFICALLY ENGINEERED & MATCHED GROUPS OF COMPONENTS DESIGNED TO PROVIDE SUPERIOR BRAKE SYSTEM PERFORMANCE & CUSTOM APPEAL OVER A WIDE RANGE OF APPLICATIONS.
- THESE BRAKE KITS REQUIRE AT LEAST 15″ DIAMETER WHEELS
- BRAKE KIT INCLUDES:
- 0.50″ THICK X 11.00″ O.D. SOLID ROTORS WITH HATS
- FEATURING BOTH 5 X 4 1/2″ AND 5 X 4 3/4″ BOLT PATTERNS
- SINGLE PISTON BRAKE CALIPERS WITH PADS
- BACKING PLATE / CALIPER MOUNTING BRACKET PLATES WITH DRUM-STYLE PARKING BRAKE ASSEMBLIES INSTALLED
- NECESSARY BOLTS, NUTS, AND REGISTERS TO INSTALL THE BRAKING SYSTEM ON BOTH REAR WHEELS
- 0.50″ THICK X 11.00″ O.D. SOLID ROTORS WITH HATS
- PARKING BRAKE CABLE KIT:
- CONNECTS TO THE CURRIE PARKING BRAKE ASSEMBLIES, THEN COMES TOGETHER TO JOIN THE STOCK CABLE BEHIND THE TRANSMISSION
- FLEXLINE KIT:
- STEEL BRAIDED BRAKE LINES, BANJO FITTINGS & BOLTS, AND CHASSIS FITTINGS TO CONNECT THE CALIPERS TO THE HARD LINES
- ALSO INCLUDES WELD-ON LINE TABS TO INSTALL ON YOUR REAR END
- HARD LINE KIT:
- STEEL HARD BRAKE LINE TUBING TO CONNECT THE CHASSIS FITTINGS TO THE INCLUDED RUBBER HOSE
- RUBBER HOSE CONNECTS THOSE HARD LINES TO THE LINE ON THE FRAME
- NOTE: TUBING BENDING IS GENERALLY NECESSARY FOR THE INSTALLATION OF THESE LINES
Reviews
There are no reviews yet.